NETGEAR WG103 108Mbps Wireless G Acces point g54 wg103
Key Benefits
-
High-speed IEEE 802.11g, up to 108 Mbps in turbo mode
-
Wi-Fi Protected Access™ 2 (WPA2-Enterprise) -- 802.11i security
-
Integrated IEEE 802.3af Power over Ethernet (PoE
-
Detachable 5 dBi antenna
-
SNMP MIB I, MIB II, and 802.11 MIB support
-
Wireless Distribution System (WDS) bridging and repeater modes Plenum-rated, Wi-Fi Certified
-
Support for multiple BSSIDs/VLAN to enable more granular access to the network based upon user type
-
Ability to detect rogue Access Points (AP) and rogue stations
-
IntelliFi™ RF Management Technology
This powerful device provides the industry standard access to corporate network resources, email and the Internet and includes support for MBSSID/VLANs, to enable more granualar access to the network. Fully compatible with IEEE 802.11g, (2.4 GHz), it can also be set for dynamic 108 Mbps 802.11g. With its robust security measures, simplified management and configuration, SNMP support, integrated IEEE 802.3af power over Ethernet (PoE), IntellilFi™ RF Management Technology and Wi-Fi certification, the WG103 brings standards-based enterprise-level functionality at a mid-market price.
Secure
Complies with industry security standards for wireless data encryption, and user authorization. WPA2-Enterprise (802.11i) provides enhanced, interoperable wireless networking security. WPA2 and 802.1x support enables strong mutual authentication to ensure that only legitimate clients associate with corporate RADIUS servers. Supports MAC address authentication with 256-user Access Control List (ACL) and VPN pass-through. The WG103 provides support for multiple Basic Service Set Identifiers (BSSID) and Virtual LANs (VLANs). You can configure combination of VLANS and BSSIDS to provide stronger or less restrictive access to the network according to your requirements. For example visitors could be given wireless access for the internet, but could be excluded from any access to the internal network.
Dynamic
WG103 with integrated IntelliFi radio frequency (RF) management technology, enables a wireless network to self optimize by intelligently choosing channels and dynamically adjusting the power levels to ensure coverage and avoid interference. IntelliFi creates an additional level of privacy by providing self-organizing micro cells for enterprises. An additional level of security is added when used with NETGEAR’s IntelliFi-enabled client adapter, WAG511. In addition, the WG103 supports the ability to detect rogue access points and rogue stations.
Flexible
Cost effective, compact, and simple to install and use. Integrated PoE support expands installation options by eliminating the need to locate near a power outlet. Wi-Fi certified and plenum-rated for appropriate placement above drop-down ceilings and under raised floors. Supports Simple Network Management Protocol (SNMP) and optimized for NETGEAR ProSafe Network Management System NMS100. Equipped with convenient Smart Wizard™ browser-based interface. Fitted with two powerful detachable 5 dBi antennas and compatible with NETGEAR’s ProSafe 2.4 GHz antennas for expanded wireless capacity and range.
SPECIFICATIONS
Wireless
- Standards: IEEE 802.11g 54 Mbps
- Antennas: One (1) 5 dBi detachable 2.4 GHz
Physical Interfaces
-
LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
-
Power adapter: Output 12 VDC, 1.2 A; plug is localized to country of sale
-
Four (4) LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g
-
Antenna Connector: One (1) reverse SMA
Network Management
-
Remote configuration and management through Web browser
-
SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB
Advanced Wireless Features
-
Point-to-point wireless bridge mode
-
Point-to-multipoint wireless bridge mode
-
Repeater
-
Adjustable Transmit Power Control (TPC) from 100 mW down to 0 mW
-
IntelliFi RF Management functionality including auto power transmission, channel selection
Typical Maximum Power Output
-
802.11b mode, 1 to 11 Mbps +19 dBm
-
802.11g mode, 6 to 24 Mbps +18 dBm
-
802.11g mode, 36, 48 and 54 Mbps +17/16/16 dBm
Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance.
Receive Sensitivity
-
802.11b
-
2 Mbps -93 dBm
-
5.5 Mbps -91 dBm
-
11 Mbps -89 dBm
-
802.11g
-
6 Mbps -91 dBm
-
9 Mbps -90 dBm
-
12 Mbps -89 dBm
-
18 Mbps -87 dBm
-
24 Mbps -84 dBm
-
36 Mbps -81 dBm
-
48 Mbps -77 dBm
-
54 Mbps -75 dBm
-
108 Mbps -73 dBm
Power Over Ethernet Required
Security
-
Wi-Fi Protected Access (WPA2-Enterprise) and 802.11i
-
Block SSID Broadcast
-
VPN pass-through support
-
MAC address filtering with access control lists – up to 256 users
-
802.1x RADIUS support with EAP TLS, TTLS, PEAP
-
Ability to detect rogue access points and rogue stations
-
Ability to configure multiple BSSIDs and VLANs to provide more granular access to the network based upon user type
Standards, Safety and Electromagnetic Conformance
-
IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type)
-
IEEE 802.3af Power over Ethernet (PoE)
-
FCC Part 15 Subpart B and Subpart C
-
CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12), R&TTE Directive 99/5/EC, CSIPR22(B), AS/NZS 3548 (B)
-
Plenum Rated
Physical Specifications
Environmental Specifications
-
Operating temperature: 0 to 40° C (32 to 104° F)
-
Operating humidity: 90% maximum relative humidity, noncondensing
System Requirements
-
Windows® 98, Me, 2000, or XP
-
2 Mbytes of available disk space
Warranty
NETGEAR 3-year warranty
-
Package Contents
-
ProSafe 802.11g Wireless Access Point WG103
-
One (1) 5 dBi Detachable Antenna
-
Resource CD
-
Power adapter
-
Ethernet cable
-
Installation guide
-
Warranty/support information card
